CMK Design Studio Tampa

Most CMK Tampa kitchen remodels land between $45,000 and $150,000+, with the typical full-custom project running $65,000 to $95,000. The four biggest cost drivers are cabinet grade (stock vs. semi-custom vs. fully custom), countertop material (quartz, granite, quartzite, or natural marble), whether the layout changes (removing a wall, adding an island, relocating plumbing or gas), and appliance selection.

Typical tiers we see in Tampa, South Tampa, Westchase, and New Tampa homes:

• $45,000 to $65,000: Stock cabinet replacement, new quartz counters, new backsplash, lighting, and fixtures with no layout changes.
• $65,000 to $95,000: Full semi-custom cabinetry, quartz or quartzite tops, new island, upgraded appliance package, full electrical and plumbing upgrade.
• $95,000 to $150,000+: Fully custom cabinetry, structural wall removal with beam and engineering, waterfall islands, integrated panel-ready appliances, and high-end stone or marble.

Every CMK kitchen remodel includes design, labor, materials, City of Tampa / Hillsborough County permits, project management, and a one-year Peace of Mind Warranty on workmanship and installed materials. Your designer will give you an exact range during your free consultation, with no surprises mid-project.

Tampa bathroom remodels with CMK typically range from $22,000 to $75,000+, depending on size, scope, and finishes. The biggest cost drivers are whether you're keeping the existing layout, the complexity of the shower (tile-only vs. frameless glass vs. zero-entry curbless), the vanity grade, and whether plumbing is being relocated.

Typical tiers in Hillsborough County:

• $22,000 to $35,000: Guest or hall bath refresh: new vanity, mirror, lighting, toilet, tile floor, and a re-tiled tub/shower in the existing footprint.
• $35,000 to $55,000: Primary bath with custom vanity, quartz tops, larger walk-in shower with frameless glass, new tile, Schluter waterproofing, and updated fixtures.
• $55,000 to $75,000+: Full primary suite gut: layout changes, freestanding tub, curbless shower, double vanity, custom cabinetry, heated floors, designer fixtures. Common on South Tampa and Davis Islands projects.

Because CMK holds the State Certified Plumbing Contractor license (CFC 1430533), every shower pan, drain relocation, and fixture install is done by our plumbers. That keeps the bathroom timeline tight and the warranty under one company.

From the day demo starts, most Tampa bathroom remodels finish in 3 to 6 weeks. A typical timeline looks like:

• Week 1 (Demo & rough-in): Existing tile, vanity, tub, and fixtures are removed. Plumbing and electrical rough-ins happen here (handled under CFC 1430533 plumbing and ER 13016498 electrical), then we pass the rough inspection.
• Week 2 (Shower waterproofing & substrate): Schluter membrane waterproofing on every shower (lifetime warranted, no paint-on shortcuts), shower pan set, backer board on walls.
• Week 3 (Tile install): Floor tile, shower walls, niche, accent bands. Grout cures over several days before sealing.
• Weeks 4 to 5 (Vanity, fixtures, glass): Cabinetry and countertop install, plumbing trim (faucets, shower heads, toilet), lighting trim, and frameless shower glass measured and installed.
• Week 5 to 6 (Punch list & final walkthrough): Caulking, paint touch-ups, hardware, accessories, and a detailed walkthrough with your project manager.

Full primary suite remodels with layout changes, zero-entry showers, or heated floors typically run 5 to 7 weeks. Your CMK project manager provides a complete day-by-day schedule before demolition starts and communicates daily through the build.

Yes. CMK is a Florida State Certified General Contractor (CGC 1516665), Plumbing Contractor (CFC 1430533), Roofing Contractor (CCC 1336554), and Registered Electrical Contractor (ER 13016498). We pull every required permit through the City of Tampa or Hillsborough County, schedule every inspection (rough, mid, final), and own the entire process from application through certificate of completion. You never visit the permit office.

For waterfront and flood-zone properties on Davis Islands, Bayshore, and Westshore, we also handle FEMA flood-zone compliance, coastal construction line review, and any HOA architectural review board submissions when applicable.

CMK serves all of Hillsborough and Pinellas Counties from the Hillsborough Avenue design studio, including:

• South Tampa: Hyde Park, Palma Ceia, Davis Islands, Bayshore, Beach Park, Westshore, and Sunset Park
• North & East Hillsborough: Carrollwood, Westchase, New Tampa, Tampa Palms, Temple Terrace, Brandon, and Riverview
• Pinellas County: Clearwater, St. Petersburg, Palm Harbor, Dunedin, and Safety Harbor

If you don't see your neighborhood listed, call (813) 379-2116. We likely serve it. Most of our Tampa projects are within a 30-minute drive of the Hillsborough Avenue showroom.

The CMK Tampa Design Studio on Hillsborough Avenue is built around touchable materials, not catalogs or screens. You'll see and physically interact with:

• Countertops: Full quartz, granite, quartzite, and natural marble slabs in our vertical display: Calacatta whites, warm greiges, dramatic veining, leathered finishes
• Cabinetry: Shaker, slab, beadboard, and inset doors with soft-close hinges and drawer hardware you can open and close
• Tile & stone: Marble-look porcelain, large-format slabs, subway, mosaic, penny rounds, zellige, and natural stone in matte and polished finishes
• Bath fixtures: Faucets, shower heads, tub fillers, and pulls in matte black, brushed gold, polished chrome, brushed nickel, and unlacquered brass
• Full kitchen and bathroom displays you can walk through to see scale, lighting, and finish combinations under real conditions

Your designer pairs everything live so you see how a marble-look porcelain tile actually reads against a shaker cabinet door under Florida light, not how it looks in a manufacturer's photoshoot.